When was the final time the roof of one’s building was inspected? If it has been awhile, the roof may have problems lurking that need immediate attention. Some roof problems cause obvious signs such as leaks, while others produce subtle signs which are only detectable at first glance. In either case, leaving the issues unaddressed can cost you thousands when you finally repair them. If the roof on your building has any of the problems listed below, a company that specializes in commercial roofing should repair them quickly:
Roof panels buckle due to weather damage and poor installation. Regardless of the cause, the buckling allows wind to blow underneath the panels, making them loose. Because the problem worsens, the panels start to fall off, often coming off in large sections when a storm hits. Buckled panels are one of the most commonly fixed problems by companies that perform roof repair.
Expended Screw Holes
Expanded screw holes are another problem for panel roofs. Over time, wind and fluctuating temperatures cause the screw holes in panels to widen around the screws that hold the panels set up. This creates a space where water can leak within the panels and soak the roof deck. After the deck becomes saturated, the problem is costly to fix.
Improper heating procedures and dry lapping cause hot bituminous roof systems to blister. Although small blisters seldom pose an issue, large ones can rupture and invite water to seep beneath the bitumen. Once the blisters form, hot weather typically makes them worse. As a result of humid subtropical climate in some regions of the country, commercial roofing frequently experiences blistering.
Blocked drains and improper sloping can cause water to assemble in small ponds on a roof. Repairing a blocked drain is simple, but fixing a sloping problem is more complex. Often, installing a taper insulation system to establish a new slope is a good solution. Through the rainy season, resolving ponding water is one of the most common forms of roof repair.
Flashing prevents water from seeping in the crevice where the roof abuts to protrusions such as chimneys and vents. Over time, most flashing must be resealed. If it’s not, leaks could cause serious damage the deck and building interior. Most flashing problems are corrected during scheduled maintenance.
Missing Soft wash roof cleaning near me and high elements of brick walls that have parts of missing mortar could cause leaks. These leaks tend to be recognised incorrectly as leaks in the roof membrane, but a thorough inspection by a company that specializes in commercial roofing will reveal the real problem. Most parts of missing mortar could be repaired with basic tuck pointing procedures.
The problems above are some of the most common reasons for roof repair. If they are corrected early, most problems are cheap to fix, but not addressing them until they cause serious problems may necessitate roof replacement. Having a scheduled maintenance agreement with a roofing company is the best way to ensure problems are detected early.